三菱PLC，三菱变频器，三菱伺服，三菱电机--广州凌控

[DESIGN PRECAUTIONS]
DANGER
Createan interlock circuit on the program so that the system will operate safely based on the
communication status information. Failure to do so may cause an accident due to an erroneous
output or malfunction.
When an error occurs, all outputs are turned off in the MELSEC-ST system. (At default)
However, I/O operations of the head module and respective slice modules can be selected for the
following errors:
(1) Communication error ( MELSEC-ST CC-Link Head Module User's Manual "4.3.1 Output
status setting for module error")
(2) Slice module error
The output status for the case of an error can be set to Clear, Hold, or Preset with a command
parameter of each slice module. (For whether the setting is available, refer to each slice module
manual.)
Since the parameter is set to Clear by default, outputs will be turned off when an error occurs.
This parameter setting can be changed to Hold or Preset when the system safety is ensured by
holding or presetting the output. ( Section 3.3.2 Combinations of various functions)
CF卡 GT05-MEM-4GC
Q系列編程器ATA卡 Q2MEM-32MBA
CF卡 GT05-MEM-8GC
Q系列PLC線性快閃存儲卡 Q2MEM-2MBF
CF卡 GT05-MEM-16GC
Q系列PLC存儲卡 Q3MEM-8MBS
模塊 AJ71ME81
CF卡 GT05-MEM-512MC
Q系列PLC線性快閃存儲卡 Q2MEM-4MBF
Q系列PLC存儲卡用適配器 Q2MEM-ADP
存儲卡適配器 GT05-MEM-ADPC
存儲卡 Q1MEM-64S
MES接口模塊 QJ71MES96
Q系列PLC存儲卡 Q3MEM-4MBS-SET
Q系列PLC內存卡 Q2MEM-1MBS
Q系列編程器SRAM卡用電池 Q3MEM-BAT
閃存卡 QD81MEM-2GBC
Q系列編程器ATA卡 Q2MEM-8MBA
可選功能板 GT15-MESB48M
Q系列編程器SRAM卡用電池 Q2MEM-BAT
閃存卡 QD81MEM-4GBC
CF卡 GT05-MEM-128MC
Q系列PLC內存卡 Q2MEM-2MBS
可選功能板 GT16-MESB
MES接口模塊附件 GT05-MEM-128MC
閃存卡 QD81MEM-1GBC
閃存卡 QD81MEM-512MBC
CF卡 GT05-MEM-1GC
MES接口模塊附件 GT05-MEM-256MC
CF卡 GT05-MEM-2GC