三菱PLC，三菱变频器，三菱伺服，三菱电机--广州凌控

[DESIGN PRECAUTIONS]
!
DANGER
Create an interlock circuit on the program so that the system will operate safety based on the
communication status information. Failure to so may cause an accident due to an erroneous
output or malfunction.
When an error occurs, all outputs are turned OFF in the MELSEC-ST system (at default).
However, I/O operations of the head module and respective slice modules can be selected for
the errors described below.
Select the status for each module for the entire system safety.
(1) Communication error (Head Module User’s Manual)
(2) Slice module error
The output status for the case of an error can be set to Clear, Hold or Preset with a
command parameter of each slice module. (For setting availability, refer to the manual for
each slice module.)
Since the parameter is defaulted to Clear, outputs will be turned off if an error occurs.
This parameter setting can be changed to Hold or Preset when the system safety is more
ensured by holding or presetting the output.

Q系列PLC內存卡 Q2MEM-2MBS
CF卡 GT05-MEM-16GC
Q系列PLC線性快閃存儲卡 Q2MEM-2MBF
閃存卡 QD81MEM-4GBC
存儲卡 Q1MEM-64S
Q系列編程器SRAM卡用電池 Q2MEM-BAT
CF卡 GT05-MEM-8GC
閃存卡 QD81MEM-8GBC
可選功能板 GT15-MESB48M
MES接口模塊 QJ71MES96
MES接口模塊附件 GT05-MEM-128MC
Q系列PLC存儲卡 Q3MEM-4MBS-SET
Q系列PLC內存卡 Q2MEM-1MBS
Q系列編程器ATA卡 Q2MEM-8MBA
閃存卡 QD81MEM-512MBC
可選功能板 GT16-MESB
Q系列PLC線性快閃存儲卡 Q2MEM-4MBF
Q系列PLC內存卡 Q3MEM-4MBS
CF卡 GT05-MEM-4GC
Q系列PLC存儲卡 Q3MEM-8MBS
Q系列PLC存儲卡 Q3MEM-8MBS-SET
MES接口模塊附件 GT05-MEM-256MC
CF卡 GT05-MEM-512MC
CF卡 GT05-MEM-256MC
存儲卡適配器 GT05-MEM-ADPC
Q系列編程器SRAM卡用電池 Q3MEM-BAT
CF卡 GT05-MEM-1GC
CF卡 GT05-MEM-2GC
Q系列PLC存儲卡用適配器 Q2MEM-ADP
閃存卡 QD81MEM-1GBC