三菱PLC，三菱变频器，三菱伺服，三菱电机--广州凌控

[DESIGN PRECAUTIONS]
!
DANGER
Using communication status information, create an interlock circuit on the programs so that the
system will operate safely. Failure to do so may cause an accident due to incorrect output or
malfunction.
When an error occurs, all outputs in the MELSEC-ST system are turned OFF. (At default)
However, I/O operation in the case of the following errors can be selected for the head module
and each slice module. Configure the settings to ensure safety of the entire system.
(1) Communication error (Refer to the MELSEC-ST PROFIBUS-DP Head Module User’s
Manual.)
(2) Slice module failure
The output status in the case of an error can be set to Clear/Hold/Preset with a user
parameter of each slice module. (For the setting, refer to each slice module manual.)
Since the parameter is set to Clear by default, outputs are turned OFF if an error occurs.
This parameter setting can be changed to Hold or Preset if necessary. (Refer to Section
3.3.2.)

CF卡 GT05-MEM-4GC
Q系列編程器ATA卡 Q2MEM-16MBA
CF卡 GT05-MEM-256MC
存儲卡 Q1MEM-64S
閃存卡 QD81MEM-8GBC
CF卡 GT05-MEM-1GC
CF卡 GT05-MEM-512MC
可選功能板 GT15-MESB48M
Q系列PLC存儲卡用適配器 Q2MEM-ADP
閃存卡 QD81MEM-1GBC
Q系列PLC存儲卡 Q3MEM-4MBS-SET
Q系列編程器SRAM卡用電池 Q2MEM-BAT
Q系列PLC線性快閃存儲卡 Q2MEM-2MBF
MES接口模塊附件 GT05-MEM-128MC
可選功能板 GT16-MESB
MES接口模塊附件 GT05-MEM-256MC
閃存卡 QD81MEM-2GBC
CF卡 GT05-MEM-16GC
Q系列PLC內存卡 Q2MEM-2MBS
Q系列PLC線性快閃存儲卡 Q2MEM-4MBF
Q系列PLC存儲卡 Q3MEM-8MBS-SET
CF卡 GT05-MEM-2GC
Q系列編程器ATA卡 Q2MEM-32MBA
Q系列編程器SRAM卡用電池 Q3MEM-BAT
閃存卡 QD81MEM-4GBC
模塊 AJ71ME81
閃存卡 QD81MEM-512MBC
CF卡 GT05-MEM-8GC
Q系列PLC內存卡 Q2MEM-1MBS
模塊 A1SJ71ME81