三菱PLC，三菱变频器，三菱伺服，三菱电机--广州凌控

[Installation Precautions]
CAUTION
z Use the programmable controller in an environment that meets the general specifications
contained in CPU module User's Manual to use.
Using this programmable controller in an environment outside the range of the general
specifications could result in electric shock, fire, erroneous operation, and damage to or
deterioration of the product.
z While pressing the installation lever located at the bottom of module, insert the module
fixing tab into the fixing hole in the base unit until it stops. Then, securely mount the
module with the fixing hole as a supporting point.
Incorrect loading of the module can cause a malfunction, failure or drop.
Securely fix the module with screws if it is subject to vibration or shock during use.
Tighten the screw in the specified torque range.
Undertightening can cause a drop, short circuit or malfunction.
Overtightening of screws can cause damages to the screws and/or the module,
resulting in fallout, short circuits, or malfunction.
z Completely turn off the externally supplied power used in the system when mounting or
removing the module.
Not doing so may cause damage to the module.
z Do not directly touch the module's conductive parts or electronic components.
Touching the conductive parts could cause an operation failure or give damage to the
module.

模擬量輸出模塊 A68DAI-S1
模塊 AJ35PTC-CNV-SI
中繼模塊 AJ65BT-RPI-10A
模塊 AJ35PTC-CNV-GI
適配器 Q6DIN1A
中斷輸入模塊 QI60
速中斷模塊 A1SI61
模擬量輸出模塊 Q68DAV，Q68DAI
模塊 AD35ID1
模塊 A1SJ71ID1-R4
模塊 AJ35PP-CNV-SI
電流輸出模擬量模塊 Q68DAIN
模塊 A1SJ71ID2-R4
RS-232C通訊用模塊 FX2N-232IF
ID接口模塊 QD35ID1
外部輸入/輸出單元 GT15-DIO
適配器 Q6DIN1
CCLink模塊 AJ65BT-64DAI
中繼模塊 AJ65BT-RPI-10B
適配器 Q6DIN3
模擬量輸出模塊 A616DAI
模塊 A1SD32ID1
中斷模塊 AI61-S1
適配器 Q6DIN2
中斷模塊 QI60
中斷模塊 AI61
模塊 AJ35PP-CNV-GI
模擬量輸出模塊 A1S68DAI
模塊 AJ71ID2-R4
模擬量模塊 AJ65VBTCU-68ADIN