三菱PLC，三菱变频器，三菱伺服，三菱电机--广州凌控

[INSTALLATION PRECAUTION]
CAUTION
z Use the PLC in an environment that meets the general specifications contained in CPU
module User's Manual to use.
Using this PLC in an environment outside the range of the general specifications may
cause electric shock, fire, malfunction, and damage to or deterioration of the product.
z When installing the module, securely insert the module fixing tabs into the mounting holes
of the base module while pressing the installation lever located at the bottom of the module
downward.
Improper installation may result in malfunction, breakdown or the module coming loose and
dropping.
Securely fix the module with screws if it is subject to vibration or shock during use.
Tighten the screws within the range of specified torque.
If the screws are loose, it may cause the module to fallout or malfunction.
If the screws are tightened too much, it may cause damage to the screw and/or the module,
resulting in fallout or malfunction.
z Completely turn off the externally supplied power used in the system when mounting or
removing the module.
Not doing so may cause damage to the module.
z Do not directly touch the conductive area or electronic components of the module.
Doing so may cause malfunction or failure in the module.
速中斷模塊 A1SI61
適配器 Q6DIN3
模塊 A1SJ71ID2-R4
模擬量模塊 AJ65BT-64DAI
RS-232C通訊用模塊 FX2N-232IF
模塊 AJ35PP-CNV-SI
模塊 AJ35PP-CNV-GI
ID接口模塊 QD35ID2
模塊 AD35ID2
模塊 A1SJ71ID1-R4
模塊 A1SD32ID2
仿真單元 A6SIM-X64Y64
模塊 AJ71ID1-R4
中斷模塊 QI60
模塊 A1SD35ID1
模擬量輸入模塊 Q68ADV，Q68ADI
模塊 AJ35PTC-CNV-GI
外部輸入/輸出單元 GT15-DIOR
AS-I主站模塊 FX2N-32ASI-M
模擬量模塊 AJ65VBTCU-68ADIN
模塊 AD35ID1
模塊 AJ35PP-CNV-GI
模擬量輸出模塊 A68DAI-S1
模塊 AJ71ID2-R4
模塊 A1SD35ID2
適配器 Q6DIN1A
電流輸出模擬量模塊 Q68DAIN
模塊 AJ35PTC-CNV-GI
中繼模塊 AJ65BT-RPI-10A
電流輸入模擬量模塊 Q68ADI