GX DEVELOPER GX DEVELOPER VERSION 8 OPERATING MANUAL.PART1
資料介紹：
1) Data type
Designates the type of the data to be added.
When Basic model QCPU is selected, common comment cannot be selected.
When the FXCPU is selected, only the comments by program can be selected.
2) Program type
Choose either of ladder program or SFC program. When creating an SFC on
the A series, make the following settings.
1. Set the microcomputer value in the memory capacity setting of PLC
parameters.
2. Choose SFC in the project type on the [Project]
[Edit data]
[New]
screen.
3) Data name of the data to be added
Designates the name of the data to be added.
If one of A series PLCs is set as the PLC type of the active project, the name is
fixed as SUB1, SUB2, or SUB3. (If the PLC type is A4UCPU, comments by
program, named SUB4, can also be added.)
Name of subprograms can be designated after completing memory capacity
setting for parameters.
For Q/QnA series, the name should be designated within 8 characters.
For FX series, MAIN is designated as the name.
Characters that may be used to set a data name
For A series
The data name of the A series accepts only alphanumeric characters, -
(hyphen) and _ (underline).
In the A series, an error will occur if the data name is headed by a numeral.
For Q/QnA/FX series
Alphanumeric characters, kana, kanji, _, ^, $,
–
, (tilde), !, #, %, &, ( ), -, { },
@, ' (single quotation)
Unusable characters
模擬量輸入擴展板 FX3G-2AD-BD
可選功能板 GT15-MESB48M
GT15人機界面 GT1575-VNBD
保護膜 GT15-50PSCW
背光燈 GT16-80SLTT
GOT到GOT長距離連接電纜 GT15-C200BS
PLC FX3G-40MT/ESS
GT10觸摸屏 GT1030-LBLW
保護膜 GT16-80PSGW
RGB輸出單元 GT16M-ROUT
網絡模塊 AJ72QLP25G
保護膜 GT10-20PSCW
保護膜 GT16-90PSGW
外部連接電纜 GT11H-C60-37P
GT16觸摸屏 GT1675M-STBD
USB保護膜 GT15-UCOV
GT15人機界面 GT1595-XTBD
保護膜 GT16-70PSCB
CF 卡擴展單元 GT15-CFEX-C08SET
CC-Link IE控制模塊 QJ71GP21-SX
GT16觸摸屏 GT1675M-STBA
大型CPU擴展電纜 GT15-AC30B
保護膜 GT16-60PSGW
保護膜 GT10-20PSGB
GI-50/125光纜型模塊 QJ71LP21G
附件 GT15-70ATT-87
保護膜 GT16-60PSCB
RS-422電纜 GT10-C200R4-25P
GT15人機界面 GT1572-VNBD
背光燈 GT15-70SLTT
上一條：
下一條：相關下載
