三菱PLC，三菱变频器，三菱伺服，三菱电机--广州凌控

CAUTION
Use the PLC in an environment that meets the general specifications contained in
this manual. Using this PLC in an environment outside the range of the general
specifications could result in electric shook, fire, malfunction, and damage to or
deterioration of the product.
Insert the tabs at the bottom of the module into the mounting holes in the base
module, and tighten the screws using the specified torque.
If the module is not properly installed, it may result in malfunctions, failure, or
fallout.
Securely connect a drive unit connector and peripheral connector to the
corresponding connector of the module.
If not attached properly, a contact error may occur, resulting in incorrect input or
output.
Always attach a cover to connectors that are not used. If not covered, malfunctions
may occur.
Do not directly touch the module's conductive parts or electronic components.
Doing so could cause malfunction or failure in the module.
保護膜 GT16-70PSCW
CPU單元 A2SCPU
性能型QCPU Q06HCPU
伺服馬達 HF-SP51B
模塊 AJ35PTC-CNV-GI
定位模塊 QD70P8
RS422轉換單元 GT15-RS2T4-9P
RS-485適配器 FX3U-485ADP
光纖中繼模塊 AJ65SBT-RPS
RS-422電纜 GT10-C200R4-8P
通道間隔離脈沖輸入模塊 QD60P8-G
模塊 AJ35PP-CNV-GI
通用型Q系列CPU Q13UDHCPU
A模式Q系列CPU Q06HCPU-A
脈沖輸出模塊 FX2N-10PG
伺服電機電源用電纜 MR-PWS1CBL10M-A2-L
定位模塊模塊 AJ65BT-D75P2-S3
RS-232C適配器 FX2NC-232ADP
過程CPU Q12PHCPU
FA設備連接繼電器電纜 GT11H-C15R4-8P
SI/QSI光纜型模塊 QJ71LP21-25
RS-422電纜 GT10-C100R4-8P
性能型QCPU Q12HCPU
CPU單元 Q2ACPU
存儲卡 FX-EPROM-8
外部連接電纜 GT16H-C30-42P
定位模塊 QD70P4
編碼器反饋、主軸定向、定位模塊 FR-A7AP
外部連接電纜 GT16H-C80-32P
處理速度更快的CPU Q04UDHCPU