三菱PLC，三菱变频器，三菱伺服，三菱电机--广州凌控

. Installation
Caution
• Use in the environments specified under the general specification in the manual.
Do not use the product in environments with excessive or conductive dust, corrosive or
flammable gas, oily smoke, moisture or rain, excessive heat, regular impact shocks or
excessive vibration, as it may result in electrical shock, fire, malfunction, damage or
deterioration on the product.
• Make sure to shut off the power outside the product before installing or wiring it.
Otherwise, electric shock or serious damage to on the product may occur.
• Never drop wire chips or shavings into the vent slits when drilling screw holes or performing
wiring, as they may cause fire, breakdown, or malfunction.
Securely install the 485BD to the designated port.
Poor connection may cause malfunction.
2.1 Installation procedure
Turn off the power of the programmable controller, and mount the
485BD using the following procedure.
➀Remove the panel cover from the top face of the base unit.
➁Connect the connector for programmable controller provided on
the 485BD to the board mounting connector provided on the
base unit.
➂Fix the 485BD to the base unit using t
PLC FX2N-48MR-DS
晶體管輸出單元 FX2N-48ET
晶體管輸出單元 FX2N-48ET-D
PLC FX2N-48MR-D
PLC FX2N-48MT-DSS
PLC FX2N-48MT-E/UL
PLC FX2N-48MT-ES/UL
PLC FX2N-48MT-ESS/UL
PLC FX2N-48MS-E/UL
繼電器輸出單元 FX2N-48ER
PLC FX2N-48MS
PLC FX2N-48MR-001
繼電器輸出單元 FX2N-48ER-UA1/UL
RS-485擴(kuò)展板 FX2N-485-BD
PLC FX2N-48MT-001
PLC FX2N-48MR-UA1/UL
PLC FX2N-48MR-ES/UL
PLC FX2N-48MT-D