三菱PLC，三菱变频器，三菱伺服，三菱电机--广州凌控

2. Installation
2.1 Installation procedure
Make sure to turn off the power before installing the 485BD.
A) Communication board 485BD (function expansion board)
B) Connector for optional equipment
C)M3 screw to fix board (2 pieces) (offered as accessories of board)
D) Top cover for board (offered as an accessory of board)
E) M3 screw to fix top cover (offered as an accessory of board)
Note: Do not remove this screw of FX1S.
• Plug the communication board A) in to the connector B).
• Fix the board to the basic unit with two M3 screws C). (Tightening
torque: 0.3 to 0.6 Nxm)
• Remove the top cover of the basic unit, and attach the top cover for
board D) instead.
During attachment, remove D)’ with a nipper, etc. so that the connector of the board is exposed.
• Fix the top cover with the M3 screw E). (Tightening torque: 0.3 to 0.6 Nxm)
• When the FX1N-5DM is used also, refer to the Hardware manual offered with the FX1S/FX1N Series
PLC main unit.
• Only one function expansion board is available for one FX1S/FX1N Series PLC basic unit. Never stack
up two or more function expansion boards. (Even if they are stacked up, they do not function at all.)
• The 485BD can be used with the FX1N-EEPROM-8L only for program
PLC FX1N-24MT-ES/UL
PLC FX1N-24MT-D
PLC FX1N-60MR-DS
PLC FX1N-40MR-ES/UL
可編程控制器 FX1N-40MR-001
PLC FX1N-60MT-DSS
擴展板 FX1N-CNV-BD
可編程控制器 FX1N-60MR-001
輸出擴展板 FX1N-2EYT-BD
可編程控制器 FX1N-14MR-001
PLC FX1N-40MR-D
可編程控制器 FX1N-40MT-001
擴展板 FX1N-8AV-BD
PLC FX1N-60MR-D
輸入擴展板 FX1N-4EX-BD
PLC FX1N-14MT-ES/UL
PLC FX1N-40MT-DSS
PLC FX1N-60MT-ES/UL
PLC FX1N-14MT-D
PLC FX1N-24MR-ES/UL
PLC FX1N-60MR-ES/UL
PLC FX1N-14MR-D
模擬量輸出擴展板 FX1N-1DA-BD
RS-422擴展板 FX1N-422-BD
RS-232C擴展板 FX1N-232-BD
RS-485擴展板 FX1N-485-BD
PLC FX1N-60MT-ESS/UL
可編程控制器 FX1N-24MR-001
PLC FX1N-60MT-001
PLC FX1N-40MR-001