三菱PLC，三菱变频器，三菱伺服，三菱电机--广州凌控

1. Items related to product and manual
If the descriptions relating to the "restrictions" and "allowable conditions" conflict between this manual
and the machine tool builder's instruction manual. the latter has priority over the former.
The operations to which no reference is made in this manual should be considered "impossible".
This manual is complied on the assumption that your machine is provided with all optional functions.
Confirm the functions available for your machine before proceeding to operation by referring to the
specification issued by the machine tool builder.
In some NC system versions. there may be cases that different pictures appear on the screen, the machine
operates in a different way on some function is not activated.
2. Items related to faults and abnormalities
If the battery low warning is issued, save the machining programs, tool data and parameters in an input/
output device, and then replace the battery. When the battery alarm is issued, the machining programs, tool
data and parameters may have been destroyed. Replace the battery and then reload the data.
3. Items related to setup
Always set the stroke end and stroke limit. Failure to set this could result in collision with the machine end.
Do not adjust the spindle when possible risks associated with adjustment procedures are not thoroughly
taken into consideration.
Be careful when touching spindle's rotating section, or your hand may be caught in or cut.
The analog output R registers are allocated in ascending order of channels and station numbers
automatically. Therefore, the analog output destination may change depending on the added option.
[Continued to next page]
伺服電機電源用電纜 MR-PWS1CBL2M-A1-H
伺服電機 HC-MFS43K
編碼器用電纜 MR-ENECBL10M-H
伺服驅動器 MR-J2S-40B
編碼器電纜 MR-JCCBL30M-H
個人電腦通信電纜 MR-JRPCATCBL3M
PLC FX3U-64MR/DS
PLC FX1N-60MT-ESS/UL
GT16觸摸屏 GT1665M-VTBD
PLC FX2N-80MT-ESS/UL
PLC FX1S-14MR-ES/UL
編碼器用電纜 MR-EKCBL30M-H
伺服控制器 MR-J2S-30KB
伺服馬達 HA-LFS15K1M4B
編碼器電纜 MR-JHSCBL10M-H
模擬量輸入模塊 AJ35T-M04B-R
編碼器接頭 MR-J3ENCBL5M-A1-H
編碼器接頭 MR-J3ENCBL10M-A1-L
編碼器接頭套裝 MR-J3SCNS
多路轉換模塊 A60MXR
CC-Link接口單元 MR-J2S-T01
存儲卡 FX1N-EEPROM-8L
編碼器電纜 MR-JHSCBL10M-L
接線端子塊 MR-TB20
PLC FX3U-48MT/ES-A
PLC FX1S-10MR-DS
PLC FX2N-32MT-ES/UL
編碼器用接頭套件 MR-ENECNS
伺服馬達 HF-MP23B
PLC FX2N-64MR-UA1/UL