三菱PLC，三菱变频器，三菱伺服，三菱电机--广州凌控

Never disassemble or modify the module.
Failure to observe this could lead to trouble, malfunctioning, injuries or fires.
Completely turn off the externally supplied power used in the system before installing or
removing the module.
Not doing so may cause an operation failure or damage to the module.
Before starting test operation, set the parameter speed limit value to the slowest value, and
make sure that operation can be stopped immediately if a hazardous state occurs.
Always make sure to touch the grounded metal to discharge the electricity charged in the body,
etc., before touching the module.
對應SSCNET定位模塊 QD75M2
定位模塊 QD75P2
差動輸出定位模塊(升級版) QD75D1N
定位模塊 QD75P1
對應SSCNET III定位模塊 QD75MH1
對應SSCNET定位模塊 QD75M4
對應SSCNET III定位模塊 QD75MH2
差動輸出定位模塊 QD75D1
定位模塊(升級版) QD75P2N
定位模塊 QD75P4
差動輸出定位模塊 QD75D2
定位模塊(升級版) QD75P1N
對應SSCNET定位模塊 QD75M1
定位模塊 QD75P1，QD75P2，QD75P4
差動輸出定位模塊(升級版) QD75D4N
對應SSCNET III定位模塊 QD75MH4
定位模塊(升級版) QD75P4N
差動輸出定位模塊(升級版) QD75D2N
差動輸出定位模塊 QD75D4