三菱PLC，三菱变频器，三菱伺服，三菱电机--广州凌控

A - 2 A - 2

[Installation Instructions]
!
CAUTION
• Use the programmable controller in an environment that meets the general specifications
contained in the user's manual of the CPU module to use.
Using this programmable controller in an environment outside the range of the general
specifications may cause electric shock, fire, malfunction, and damage to or deterioration of the
product.
• While pressing the installation lever located at the bottom of module, insert the module fixing tab
into the fixing hole in the base unit until it stops. Then, securely mount the module with the fixing
hole as a supporting point.
If the module is not installed properly, it may cause the module to malfunction, fail or fall off.
Secure the module with screws especially when it is used in an environment where constant
vibrations may occur.
• Tighten the screws within the range of specified torque.
If the screws are loose, it may cause the module to fallout, short circuits, or malfunction.
If the screws are tightened too much, it may cause damage to the screw and/or the module,
resulting in fallout, short circuits or malfunction.
• Before mounting/dismounting the module, be sure to shut off all phases of external power supply
used by the system.
Failure to do so may cause product damage.
• Do not directly touch the conductive area or electronic components of the module.
Doing so may cause malfunction or failure in the module.
擴展基板 Q68B
通用型Q系列CPU Q26UDHCPU
網絡模塊 AJ72QLP25
QCPU（Q模式）用總線連接電纜 GT15-QC150BS
通道間隔離脈沖輸入 QD60P8-G
Q系列PLC內存卡 Q3MEM-4MBS
差動輸出定位模塊(升級版) QD75D2N
GT11觸摸屏 GT1155-QTBDQ
差動輸出定位模塊 QD70D8
定位模塊 QD75P4
大型主基板 Q38BL
差動輸出定位模塊(升級版) QD75D1N
串行通信模塊 AJ71QC24N-R4
Q系列編程器ATA卡 Q2MEM-16MBA
擴展基板 Q63B
帶內置計數器 功能的集電極 開路輸出型定位模塊 QD72P3C3
接口板 Q81BD-J61BT11
智能通信模塊 QD51-R24
GT11觸摸屏 GT1155-QSBD
冗余電源模塊 Q63RP
Q系列PLC存儲卡用適配器 Q2MEM-ADP
電壓/電流輸出模擬量模塊 Q64DAN
電源冗余系統主基板 Q38RB
Web服務器模塊 QJ71WS96
帶基板的小點數CPU Q00JCPU-S8-SET
Ethernet模塊 AJ71QE71N-B2
差動輸出定位模塊 QD75D2
主基板 Q33B，Q35B
以太網模塊 QJ71E71-B2
GT11觸摸屏 GT1150-QLBDQ