三菱PLC，三菱变频器，三菱伺服，三菱电机--广州凌控

[Design Precautions]
DANGER
Refer to this manual for information on each station's operating status in the event of a
communication error. Erroneous outputs and malfunctions may result in serious accidents.
Create a safety circuit outside the programmable controller to ensure the whole system will operate
safely even if a personal computer failure occurs.
Failure to do so may cause an accident due to an erroneous output or malfunction.
(1) Any of emergency stop circuits, protection circuits, interlock circuits for opposite operations such
as forward and reverse rotations or for a damage-preventive mechanism such as positioning by
setting high and low limits must be provided outside the programmable controller.
(2) The station to which the CC-Link IE Controller Network board (Q80BD-J71GP21-SX/Q80BD-
J71GP21S-SX) is installed may be disconnected from the data link due to a data link error. If this
occurs, the data output from the station and written to other stations before the error will be held until
the station is reconnected to the network (until its data link is restarted). Provide a mechanism for data
link status monitoring and error handling for each station that is connected to the data link system.
C語言的控制單元 Q06CCPU-V
編碼器電纜 MR-JCCBL20M-L
編碼器電纜 MR-JCCBL2M-L
模塊 A2CCOM-TB
CPU單元 A2CCPU
C語言QCPU Q12DCCPU-V
CPU單元 A2CCPUR21
CPU單元 A2CCPUP21
編碼器電纜 MR-JCCBL10M-L
編碼器電纜 MR-JCCBL20M-H
編碼器電纜 MR-JCCBL5M-H
CC-Link用接口模塊 FX2N-32CCL
編碼器電纜 MR-JCCBL5M-L
CPU單元 A2CCPUC24-PRF
C語言的控制單元 Q06CCPU-V-B
編碼器電纜 MR-JCCBL30M-H
編碼器電纜 MR-JCCBL2M-H
CPU單元 A2CCPUC24
CC-Link用主站模塊 FX2N-16CCL-M
編碼器電纜 MR-JCCBL10M-H
編碼器電纜 MR-JCCBL30M-L