1、三菱 FX 三菱-FX-4AD-TC 用戶指南
The compensating cables that can be used for connecting with the thermocouple are the following. Type K: KX-G, KX-GS, KX-H, KX-HS, WX-G, WX-H, VX-G Type J : JX-G, JX-H For every 10 Ω of
The compensating cables that can be used for connecting with the thermocouple are the following. Type K: KX-G, KX-GS, KX-H, KX-HS, WX-G, WX-H, VX-G Type J : JX-G, JX-H For every 10 Ω of
2、三菱 FX 三菱-FX-4DA 用戶指南
Offset data BFM W #8(E) Offset/gain setting command CH1, CH2 Initial value H0000 #9(E) Offset/gain setting command CH3, CH4 Initial value H0000 #10 Offset data CH1 *1 Unit:mV
Offset data BFM W #8(E) Offset/gain setting command CH1, CH2 Initial value H0000 #9(E) Offset/gain setting command CH3, CH4 Initial value H0000 #10 Offset data CH1 *1 Unit:mV
3、三菱 FX 三菱-FX-10DM-E 用戶 手冊
The following products have shown compliance through direct testing (to the identified stan- dards) and design analysis (forming a technical construction file) to the European Directive for Elec
The following products have shown compliance through direct testing (to the identified stan- dards) and design analysis (forming a technical construction file) to the European Directive for Elec
4、三菱 FX 三菱-FX-10GM 用戶 手冊
Guidelines for the safety of the user and protection of the FX-10GM unit This manual provides information for the use of the FX-10GM unit. The manual has been written to be used by trained and c
Guidelines for the safety of the user and protection of the FX-10GM unit This manual provides information for the use of the FX-10GM unit. The manual has been written to be used by trained and c
5、三菱 FX 三菱-FX-10GM,FX(E)-20GM 硬件PROGRAMMING 手冊
Mitsubisi has a world wide reputation for its efforts in continually developing and pushing back the frontiers of industrial automation. What is sometimes overlooked by the user is the care and
Mitsubisi has a world wide reputation for its efforts in continually developing and pushing back the frontiers of industrial automation. What is sometimes overlooked by the user is the care and
6、三菱 FX 三菱-FX-10P-E 操作 手冊
Note’s on the Symbols Used in this Manual At various times through out this manual certain symbols will be used to highlight points which are intended to ensure the users personal safety and p
Note’s on the Symbols Used in this Manual At various times through out this manual certain symbols will be used to highlight points which are intended to ensure the users personal safety and p
7、三菱 FX 三菱-FX-10P-E 操作 手冊
Note’s on the Symbols Used in this Manual At various times through out this manual certain symbols will be used to highlight points which are intended to ensure the users personal safety and p
Note’s on the Symbols Used in this Manual At various times through out this manual certain symbols will be used to highlight points which are intended to ensure the users personal safety and p
8、三菱 FX 三菱-FX-16NPNT 用戶指南
± SD, RD socket of optical fiber cable ² X, Y I/O LEDs ³ Direct mounting hole (2- φ5.5(0.27)) ´ Groove for mounting DIN rail (DIN rail width: 35 (1.38)) µ Hook for mo
± SD, RD socket of optical fiber cable ² X, Y I/O LEDs ³ Direct mounting hole (2- φ5.5(0.27)) ´ Groove for mounting DIN rail (DIN rail width: 35 (1.38)) µ Hook for mo
9、三菱 FX 三菱-FX-20P-E 操作 手冊 JY992D82301D
This manual provides information for the use of the FX-20P-E-HANDY PROGRAMMING PANEL. The manual has been written to be used by trained and competent personnel. The definition of such a perso
This manual provides information for the use of the FX-20P-E-HANDY PROGRAMMING PANEL. The manual has been written to be used by trained and competent personnel. The definition of such a perso
10、三菱 FX 三菱-FX-20P-E
三菱-FX-20P-E
三菱-FX-20P-E
11、三菱 FX 三菱-FX-232ADP 用戶指南
Pins 4, 5 are not used.Short-circuited inside. ER(DTR)Send request (Data Terminal Ready) CD(DCD)Carrier Detection SG(Signal Ground) DR (DSR) Send enable (Data Set Ready) CS (CTS) Send enabl
Pins 4, 5 are not used.Short-circuited inside. ER(DTR)Send request (Data Terminal Ready) CD(DCD)Carrier Detection SG(Signal Ground) DR (DSR) Send enable (Data Set Ready) CS (CTS) Send enabl
12、三菱 FX 三菱-FX-485PC-IF 硬件 手冊
Location LED Status Check Point ding data form computer to rammable controller(s). SD LED is lit Wiring between computer and 485PC-IF is OK. SD LED is not lit Check wiring between compute
Location LED Status Check Point ding data form computer to rammable controller(s). SD LED is lit Wiring between computer and 485PC-IF is OK. SD LED is not lit Check wiring between compute
